Crystal cartridges
- TC Chris
- Anchor Member
- Posts: 3776
- Joined: Tue Jul 13, 2021 3:50 am
- Location: Traverse City, MI
- Contact:
Crystal cartridges
Does anybody have a source for the old high-output crystal cartridges for 78 players? My 1946 GE's cart is getting weak.
Chris Campbell
Chris Campbell
- Conelrad
- Hero Member
- Posts: 287
- Joined: Tue Feb 07, 2023 4:28 am
- Location: Hidden Valley, AZ
- Contact:
Re: Crystal cartridges
The antiqueradios.com Classifieds have a listing for rebuilt crystal carts.
D
D
- TC Chris
- Anchor Member
- Posts: 3776
- Joined: Tue Jul 13, 2021 3:50 am
- Location: Traverse City, MI
- Contact:
Re: Crystal cartridges
I cannot find a classified ad page on the site. Hate to sound dim-witted, but I tried every link i could find.
Chris Campbell
Chris Campbell
- electra225
- Site Admin
- Posts: 9074
- Joined: Thu Jul 08, 2021 7:48 pm
- Location: San Tan Valley, AZ
- Contact:
Re: Crystal cartridges
You could also send Gary at VM Enthusiasts an email to see what he could provide. He is listed on this board.
https://thevoiceofmusic.com/
Not too toot the horn of ARF, but if you get on their Parts board, West Tech is listed as being a rebuilder of crystal cartridges.
https://thevoiceofmusic.com/
Not too toot the horn of ARF, but if you get on their Parts board, West Tech is listed as being a rebuilder of crystal cartridges.
I haven't failed. I've just found 10,000 ways that won't work.....Thomas Alva Edison
- William
- Global Moderator
- Posts: 5511
- Joined: Fri Jul 09, 2021 12:42 pm
- Location: Hart, Michigan
- Contact:
Re: Crystal cartridges
The last I knew Gary had a few high output voltage ceramic cartridges available.
Bill
Bill
- TC Chris
- Anchor Member
- Posts: 3776
- Joined: Tue Jul 13, 2021 3:50 am
- Location: Traverse City, MI
- Contact:
Re: Crystal cartridges
I should check with ARF again. Some time back, there was discussion that Westech was out of that business, but they still have a web site.
Chris Campbell
Chris Campbell
- Conelrad
- Hero Member
- Posts: 287
- Joined: Tue Feb 07, 2023 4:28 am
- Location: Hidden Valley, AZ
- Contact:
Re: Crystal cartridges
The guy on ARF that had some said they were rebuilt in Germany and he imported them.
D
D
- TC Chris
- Anchor Member
- Posts: 3776
- Joined: Tue Jul 13, 2021 3:50 am
- Location: Traverse City, MI
- Contact:
Re: Crystal cartridges
Is there a link to the seller?
Chris Campbell
Chris Campbell
- Conelrad
- Hero Member
- Posts: 287
- Joined: Tue Feb 07, 2023 4:28 am
- Location: Hidden Valley, AZ
- Contact:
Re: Crystal cartridges
No, it was just a thread in the classifieds.
D
D
- electra225
- Site Admin
- Posts: 9074
- Joined: Thu Jul 08, 2021 7:48 pm
- Location: San Tan Valley, AZ
- Contact:
Re: Crystal cartridges
In the way of being the devil's advocate.......
You might be able to use a high-output ceramic cartridge if you can get the tone arm weight right. That radio will have a pre-amp stage that would build up the output of a ceramic cartridge so it could drive the output to sufficient volume. I saw that ad on ARF and almost posted about it. Something about those cartridges being rebuilt overseas raised the hair on my neck. I'm too suspicious, I reckon.....
I think if it was my project, I'd get in touch with Gary and get his input. He never has steered me wrong.....
You might be able to use a high-output ceramic cartridge if you can get the tone arm weight right. That radio will have a pre-amp stage that would build up the output of a ceramic cartridge so it could drive the output to sufficient volume. I saw that ad on ARF and almost posted about it. Something about those cartridges being rebuilt overseas raised the hair on my neck. I'm too suspicious, I reckon.....
I think if it was my project, I'd get in touch with Gary and get his input. He never has steered me wrong.....
I haven't failed. I've just found 10,000 ways that won't work.....Thomas Alva Edison
- Conelrad
- Hero Member
- Posts: 287
- Joined: Tue Feb 07, 2023 4:28 am
- Location: Hidden Valley, AZ
- Contact:
Re: Crystal cartridges
I need one for my Wilcox-Gay "Recordett". It cuts and plays back recorded 10" discs with the same cart in a single tone arm and a stylus change.
All in a small suitcase. I should post some pix.
It's an AM radio, too.
D
All in a small suitcase. I should post some pix.
It's an AM radio, too.
D
- TC Chris
- Anchor Member
- Posts: 3776
- Joined: Tue Jul 13, 2021 3:50 am
- Location: Traverse City, MI
- Contact:
Re: Crystal cartridges
I could not find "classifieds" on ARF.
Chris Campbell
Chris Campbell
- electra225
- Site Admin
- Posts: 9074
- Joined: Thu Jul 08, 2021 7:48 pm
- Location: San Tan Valley, AZ
- Contact:
Re: Crystal cartridges
Look near the bottom of the ARF home page. "Radio Classified" is the board for things like that.
Maybe this will help>
https://antiqueradios.com/forums/viewtopic.php?t=459502
Maybe this will help>
https://antiqueradios.com/forums/viewtopic.php?t=459502
I haven't failed. I've just found 10,000 ways that won't work.....Thomas Alva Edison
- electra225
- Site Admin
- Posts: 9074
- Joined: Thu Jul 08, 2021 7:48 pm
- Location: San Tan Valley, AZ
- Contact:
Re: Crystal cartridges
Dennis, I had a Silvertone console radio, a 12-tuber with a 12" speaker that had a recording feature. It had two tone arms, one weighed as much as a small car, for recording, the other was still pretty heavy by modern standards, but it was for playback. I don't remember the model number anymore, I sold it at our auction in Missouri. I got the radio going, but never "fiddled" with the record player(s). I have no idea whether the recording part would work or not. I didn't have any black records I could test it with.
I haven't failed. I've just found 10,000 ways that won't work.....Thomas Alva Edison
- TC Chris
- Anchor Member
- Posts: 3776
- Joined: Tue Jul 13, 2021 3:50 am
- Location: Traverse City, MI
- Contact:
Re: Crystal cartridges
I've got a Wilcox-Gay "Recordio" with the two-arm system.
Chris Campbell
Chris Campbell
Who is online
Users browsing this forum: No registered users and 34 guests
