Silvertone model 6132 console TV set

This is not a TV forum, per se. Stereo Theaters, Home Theaters and other three-in-one combination console instruments contain a TV chassis. We can discuss them here, along with stand-alone TV set issues you may care to share.
User avatar
electra225
Site Admin
Posts: 9074
Joined: Thu Jul 08, 2021 7:48 pm
Location: San Tan Valley, AZ
Contact:

Silvertone model 6132 console TV set

Post: # 8737Post electra225 »

Dad couldn't (or wouldn't) watch color TV. He claimed it hurt his eyes. So he watched a black and white set until he passed in 1987. This was his last new TV. A circa 1967-ish Sears Silvertone 25" console. Dad always bought RCA TV sets. The Sears salesman convinced him (probably incorrectly) that this set was built by RCA. I can't find a model number on the back, so I can't speak to that just yet. I'm almost sure it was built by Warwick. It has a series string chassis, yet it has a transformer that looks like a power transformer that is probably a 1:1 isolation transformer. It has two heater strings, one for the picture tube, RF, IF and audio and one for the vertical and horizontal circuits. It has 50C5 audio output with a 4X6 speaker, so it is not a deluxe set by any means. This thing has a million hours on it and worked well the last time I had it on. That was probably 20 years ago. I used it in the waiting area when I had my restoration shop. I reckon I'll start by testing the picture tube then go from there. If I can get the electronics working, I may pull it apart and refinish the cabinet and put in new grill cloth. If this wasn't dad's set, it wouldn't be worth doing anything to it. I see here in my notes I have written down Model 6193. I'm not sure that's right.
Attachments
100_0245.JPG
I haven't failed. I've just found 10,000 ways that won't work.....Thomas Alva Edison
User avatar
hermitcrab
Anchor Member
Posts: 1504
Joined: Mon Jul 12, 2021 2:49 am
Location: Tri Cities Mich
Contact:

Re: Dad's last new TV

Post: # 8775Post hermitcrab »

I believe you are correct... lots of companies copied the RCA chassis designs...
User avatar
electra225
Site Admin
Posts: 9074
Joined: Thu Jul 08, 2021 7:48 pm
Location: San Tan Valley, AZ
Contact:

Re: Dad's last new TV

Post: # 8790Post electra225 »

RCA may have built the picture tube, but I'm guessing that is all the relationship this thing has to an RCA. 14 tubes, IIRC. Not much to it. I will say that, considering its modest livery, it was a good performer, had a good picture and reasonably good sound.
I haven't failed. I've just found 10,000 ways that won't work.....Thomas Alva Edison
User avatar
Motorola minion
Anchor Member
Posts: 854
Joined: Sun Jul 11, 2021 2:23 pm
Location: Central PA
Contact:

Re: Dad's last new TV

Post: # 8822Post Motorola minion »

I have seen this model too! It was probably built by Warwick, like most of the domestic Silvertone TVs, chassis code begins with 528.

There was not much to the swing-out vertically-oriented chassis, so an easy fix as usual ;) . The 23" CRT may also have been a Sylvania.
User avatar
electra225
Site Admin
Posts: 9074
Joined: Thu Jul 08, 2021 7:48 pm
Location: San Tan Valley, AZ
Contact:

Re: Dad's last new TV

Post: # 8825Post electra225 »

This model has a flat chassis. I haven't measured the picture bulb yet, but dad always called it a 25". But he also called it an RCA...... ;) ;)
I haven't failed. I've just found 10,000 ways that won't work.....Thomas Alva Edison
Firedome
Anchor Member
Posts: 1615
Joined: Sat Jul 10, 2021 1:21 pm
Location: nowhere
Contact:

Re: Dad's last new TV

Post: # 8828Post Firedome »

That's nice that you still have it and the memories it brings you.
My folks used the same 1952 RCA b&w set from 1952 until 1971 when Dad remarried after my Mom's passing, Summer of '69 (I was 18). Wife #2 insisted on color, an RCA XL-100. In early American cabinetry, it had an excellent picture, Dad always said he was waiting for color to be "perfected" and it was excellent by then. They had that one until a move to Florida when another RCA 25" set replaced it.

We were always an RCA family, just this morning I bought an RCA antenna for OTA reception, though we all know that the real RCA is long gone.
User avatar
electra225
Site Admin
Posts: 9074
Joined: Thu Jul 08, 2021 7:48 pm
Location: San Tan Valley, AZ
Contact:

Re: Dad's last new TV

Post: # 8832Post electra225 »

I can remember dad watching Gunsmoke on this TV. They had a cat that worked on the grill cloth, which is why it is all ragged out. I haven't checked every tube, but the ones I saw are branded Silvertone. The thing has to be a high-hour set, because he used it 20 years, and it ran a lot after he got sick. I don't find a tag on the picture tube for identification, but it may be covered in dirt and I just don't see it. I still have the most expensive TV the wife and I ever bought, a 1992, 32" RCA "Home Theater" that had good audio and two external tqwer speakers originally. The tower speakers got sold accidentally in our auction. Best TV I ever owned. I hope it survived the move. That thing was almost $1400 in 1992.
I haven't failed. I've just found 10,000 ways that won't work.....Thomas Alva Edison
User avatar
TC Chris
Anchor Member
Posts: 3779
Joined: Tue Jul 13, 2021 3:50 am
Location: Traverse City, MI
Contact:

Re: Dad's last new TV

Post: # 8834Post TC Chris »

Anybody want the Zenith Chromacolor II from my Mom's house?

Chris Campbell
User avatar
electra225
Site Admin
Posts: 9074
Joined: Thu Jul 08, 2021 7:48 pm
Location: San Tan Valley, AZ
Contact:

Re: Dad's last new TV

Post: # 8836Post electra225 »

The TV guys go all ga-ga over anything that says Zenith on it. The issue you have with something like that is your location. If you were 300 miles further to the south, it would be gone before you got the offer to sell it typed. ;)

TV sets of that vintage are still very watchable and dependable. They are not as finnicky as the old tube-chassis sets.
I haven't failed. I've just found 10,000 ways that won't work.....Thomas Alva Edison
Firedome
Anchor Member
Posts: 1615
Joined: Sat Jul 10, 2021 1:21 pm
Location: nowhere
Contact:

Re: Dad's last new TV

Post: # 8854Post Firedome »

I believe Chromacolor and Chromacolor II sets had an excellent reputation, some of Zenith's best, Dave MM can give us the real skinny on any sets of that era, and before and after... if he says it's good, you can take it to the bank.
User avatar
TC Chris
Anchor Member
Posts: 3779
Joined: Tue Jul 13, 2021 3:50 am
Location: Traverse City, MI
Contact:

Re: Dad's last new TV

Post: # 8855Post TC Chris »

electra225 wrote: ↑Fri Jul 22, 2022 11:22 pm TTV sets of that vintage are still very watchable and dependable. They are not as finnicky as the old tube-chassis sets.
Maybe I should just keep it (dangerous words, those).

Chris Campbell
User avatar
electra225
Site Admin
Posts: 9074
Joined: Thu Jul 08, 2021 7:48 pm
Location: San Tan Valley, AZ
Contact:

Re: Dad's last new TV

Post: # 8856Post electra225 »

I plan to connect the old RCA to an antenna to see what I can find. We have something like 85 channels and sub-channels available here over the air. I'm willing to wager than someone, somewhere, has figured out how to connect "streaming" devices to an agile modulator, to be enjoyed on old TV sets. There are lots of black and white videos on YouTube it would be interesting to watch on an old black and white TV set. I don't know what the TV reception is like where you live, but surely you could find a few stations you could watch.
I haven't failed. I've just found 10,000 ways that won't work.....Thomas Alva Edison
User avatar
TC Chris
Anchor Member
Posts: 3779
Joined: Tue Jul 13, 2021 3:50 am
Location: Traverse City, MI
Contact:

Re: Dad's last new TV

Post: # 8860Post TC Chris »

I bought a small flat-screen for the cottage when I was renting it. A tenant wanted go see news. An attic UHF antenna receives about 10 channels I bought a powered amplified antenna but have never installed it.

Chris Campbell
User avatar
electra225
Site Admin
Posts: 9074
Joined: Thu Jul 08, 2021 7:48 pm
Location: San Tan Valley, AZ
Contact:

Re: Silvertone model 6132 console TV set

Post: # 22850Post electra225 »

I am going to revisit this set, to determine if it will work or if it needs to be put to the curb. I have learned a lot more about it, much of what I posted previously has been proven incorrect.

Dad got sold "a bill of goods" when he bought this set. This thing replaced the RCA 14" set I recently restored in a previous topic. I decided to dig this thing back out and see what I had. I used this in my shop after dad passed, so it has a layer of that black body shop dust inside it. The cabinet could use a good refinish. By what I see, it won't be that tough of a job to "pull the jug" (remove the picture tube) so I can work with the cabinet. It appears to be a nice hardwood cabinet. The balance of the guts seem to be easy enough to work with.

Dad was told it was a 25" set. It is a 23". He was told it was built by RCA. The chassis number is 529.61680. The manufacturer was Wheeler Laboratories Inc., of Great Neck, NY. Not familiar with them at all. The schematic may be found in Sams 786, Folder 3. It has 13 tubes, plus the 23HFP4A picture tube. The EIA code on the "jug" is 830, the Triad Corp. There are two series filament strings. I think this is one of those sets that has an isolation transformer in it. It has what looks like a power transformer, but it has series string tubes in it, including three typically found in AA5 radios, a 12BA6 sound IF tube, a 12AV6 first audio tube, and a 50C5 audio output tube. I think the speaker is a 3X5, but I haven't measured it yet. Suffice it to say, it's dinky. This old TV set has proven to be a good performer, given it's fairly modest livery. I'd say this is an entry-level console black and white TV set, probably the smallest and cheapest console Sears sold when this thing was new. I have only pulled three tubes. They were all branded Silvertone, but also said "Japan". So, more evidence this was a cheap set. It probably has zero retail value, less than zero collector interest, and has a good chance the "TV guys" will turn their noses up at it. But it was dad's, so I need to do my best to bring it back from the possibly being dead.
I haven't failed. I've just found 10,000 ways that won't work.....Thomas Alva Edison
User avatar
Hi-Fi-Mogul
Anchor Member
Posts: 1365
Joined: Sat Jul 10, 2021 1:53 am
Contact:

Re: Silvertone model 6132 console TV set

Post: # 22852Post Hi-Fi-Mogul »

Look forward to some photos !
Hi-Fi-Mogul
User avatar
electra225
Site Admin
Posts: 9074
Joined: Thu Jul 08, 2021 7:48 pm
Location: San Tan Valley, AZ
Contact:

Re: Silvertone model 6132 console TV set

Post: # 22853Post electra225 »

There is a frontal photo at the top of this page. IF you'd like pictures of the electronics, I can sure do that.... ;) :D
I haven't failed. I've just found 10,000 ways that won't work.....Thomas Alva Edison
User avatar
Hi-Fi-Mogul
Anchor Member
Posts: 1365
Joined: Sat Jul 10, 2021 1:53 am
Contact:

Re: Silvertone model 6132 console TV set

Post: # 22859Post Hi-Fi-Mogul »

THERE it is ! A very nice compact cabinet, Greg.

For those of us who know nada about TV's, it would
be interesting to see the innards as you go along.
Hi-Fi-Mogul
User avatar
electra225
Site Admin
Posts: 9074
Joined: Thu Jul 08, 2021 7:48 pm
Location: San Tan Valley, AZ
Contact:

Re: Silvertone model 6132 console TV set

Post: # 22860Post electra225 »

I can do that. My investigation has been preliminary to this point. I need to see if the ETF has a schematic I can download. If not, its off to the Schematic Man...... ;)
I haven't failed. I've just found 10,000 ways that won't work.....Thomas Alva Edison
User avatar
electra225
Site Admin
Posts: 9074
Joined: Thu Jul 08, 2021 7:48 pm
Location: San Tan Valley, AZ
Contact:

Re: Silvertone model 6132 console TV set

Post: # 22899Post electra225 »

Okay. I got a couple minutes on this set this afternoon. First, the picture tube checks like NOS. Very strong emissions with great cutoff. I trust it will be capable of making a good picture. Next, the super-deluxe, ultra high fidelity 3X5 speaker is coded 1056, Gefco Manufacturing, Grayslake, Illinois. Talk about obscure vendors. This set must have been way beyond the bottom-basement type set. I certainly hope I'm not wasting my time with this thing. There is copious black dirt inside the cabinet. Partially from setting in the office of my shop for so many years and partially from the coal stove dad had in his living room for years on end. Some of the tubes are marked "Japan". By the EIA codes, it appears this set was built in the US of A. Were Japanese tubes that much cheaper back in the day? Next, some pictures.......
100_1099.JPG
100_1100.JPG
100_1101.JPG
100_1102.JPG
I haven't failed. I've just found 10,000 ways that won't work.....Thomas Alva Edison
User avatar
electra225
Site Admin
Posts: 9074
Joined: Thu Jul 08, 2021 7:48 pm
Location: San Tan Valley, AZ
Contact:

Re: Silvertone model 6132 console TV set

Post: # 22900Post electra225 »

More observations on tubes....

The 17DW4 damper tube is branded "Sears", made in USA, code 312, Sylvania sourced.
The 22JF6 horizontal output tube, branded "Sears", made in USA, code 312, Sylvania sourced.
The 50C5 audio output tube, branded "Silvertone", code 830, Triad sourced.
The 4CB6 video IF tube, branded "Silvertone", made in Japan, 654 code, unknown source
The 8JV8 video amp branded RCA, GE sourced, made in USA.
The 12AV6 first audio tube, Matsushita branded, Matsushita sourced, made in Japan.
The 12BA6 sound IF tube made in USA, Silvertone branded, code 312, Sylvania sourced.
I found date codes on three tubes. "866" were on the three I saw. Eighth week of 1966?

These are the tubes I have pulled and tested to this point. It is interesting that the sweep tubes are all still Sears branded, but they are Sylvania sourced. The "little" amplifiers are from different sources. Two of the tubes are replacements. The tubes were very happy where they were. With the PCB construction of the chassis, I had to be careful removing the tubes. I used the "Chris method" on the tube sockets and used PB Blaster on the tube pins. Next up is finishing testing tubes, then I'll do a slow power up with a dim bulb, Kill-A-Watt and Variac. I'm not a believer in reforming caps, but I still like to power up gradually..... ;)
I haven't failed. I've just found 10,000 ways that won't work.....Thomas Alva Edison
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests