Packard

The place to talk about almost anything, as long as it's nice......
User avatar
electra225
Site Admin
Posts: 9074
Joined: Thu Jul 08, 2021 7:48 pm
Location: San Tan Valley, AZ
Contact:

Packard

Post: # 172Post electra225 »

Packard resized.jpg
Packard resized.jpg (117.97 KiB) Viewed 6055 times
Here is a better picture of the 1956 Packard Carribean I had as my avatar for awhile. I took this picture on my phone, and had to downsize it so it would load on here. This particular car has the incorrect tires and wheels on it. It should have Kelsey-Hayes wire wheels on it. This is the most common color combination for a '56 Carribean. They were available in yellow over black with a white cove and white over black with a yellow cove. All were powered by a twin-four-barrel 374 cid V-8 and Ultramatic transmission. This is a car Art restored.

I was fooling with resizing phone pictures, so I though I'd feature this Packard. This is quite the car with its four wheel mechanical torsion bar suspension. Horrendously complicated, but awesome when it works right.
I haven't failed. I've just found 10,000 ways that won't work.....Thomas Alva Edison
User avatar
TC Chris
Anchor Member
Posts: 3778
Joined: Tue Jul 13, 2021 3:50 am
Location: Traverse City, MI
Contact:

Re: Packard

Post: # 174Post TC Chris »

Impressive machine.

Chris Campbell
walyfd
Anchor Member
Posts: 810
Joined: Thu Jul 15, 2021 11:40 pm
Location: NEPA Scranton area
Contact:

Re: Packard

Post: # 228Post walyfd »

OMG that's gorgeous... I thought the wires were an option. Also, didn't they offer turquoise, gray and white or was that '55 only?

I like the 400 coupe, ala the Packard Continental Mark II or the Eldorado Seville with the vinyl top. But, the greatest feature was the reversible seat cushions!!! I'm not a fan of leather seats and the convertibles I've driven both had black interiors baking for hours at car shows... be nice to flip to the cloth side for the ride home.

Agreed on the torsionaire suspension. Packard was a leader to the very end. The '55 and '56s were gorgeous cars, well engineered and nicely equipped. It's a shame they went under.
User avatar
electra225
Site Admin
Posts: 9074
Joined: Thu Jul 08, 2021 7:48 pm
Location: San Tan Valley, AZ
Contact:

Re: Packard

Post: # 275Post electra225 »

The 1955 and 1956 Packards were built on the old 1951 body. The front clip was different. The rear fenders had extensions welded on to the old '51 parts. The turquoise/gray/white was '55 0nly, I believe. The '56's had a bigger engine. All the Carribeans had Kelsey-Hayes or Dayton wires from 1953 on. These were optional on all Packards, even the cheaper Clipper line. The 400 was the V-8 hardtop equivalent to the convertible Carribean. The hardtop version was called Pacific in '53 and '54. The big Patrician sedan could be had with the twin-four-barrel 374 and the same color combinations as the Carribean. You may notice how relatively "cheap" Packard hubcaps appeared. The idea was that if they made the hubcaps rather plain, more people would order the extra-cost (LOTS of extra cost!) wire wheels.
I haven't failed. I've just found 10,000 ways that won't work.....Thomas Alva Edison
User avatar
19&41
Global Moderator
Posts: 1984
Joined: Thu Jul 08, 2021 10:11 pm
Location: Jonesboro, Georgia
Contact:

Re: Packard

Post: # 278Post 19&41 »

There were a lot of hopes riding on that final series of cars Packard made. They must've been pretty good, the Soviets reverse engineered their own version for their higher echelon potentates.
"Any sufficiently advanced technology is indistinguishable from magic."
-Arthur C. Clarke
"It is difficult to get a man to understand something when his salary depends upon his not understanding it."
-Upton Sinclair
User avatar
TC Chris
Anchor Member
Posts: 3778
Joined: Tue Jul 13, 2021 3:50 am
Location: Traverse City, MI
Contact:

Re: Packard

Post: # 280Post TC Chris »

electra225 wrote: ↑Tue Jul 20, 2021 2:35 am The 1955 and 1956 Packards were built on the old 1951 body.
Your image also shows a "wrap-around" windshield. Wasn't that a later design"

Chris Campbell
walyfd
Anchor Member
Posts: 810
Joined: Thu Jul 15, 2021 11:40 pm
Location: NEPA Scranton area
Contact:

Re: Packard

Post: # 282Post walyfd »

I actually like the plain Jane covers. Packard was pretty consistent with wheelcover design. Look at a '36, '46 and a '56...

Packard bodies were like a rolls. Very solid and well built, better than Fisher from what I've been told.

Look back at those days and see how dependent on GM, delco and Rochester Ford and Packard and even RR were for components. Chrysler seemed far more self sufficient.
User avatar
electra225
Site Admin
Posts: 9074
Joined: Thu Jul 08, 2021 7:48 pm
Location: San Tan Valley, AZ
Contact:

Re: Packard

Post: # 292Post electra225 »

The wrap around windshield was later than 1951. I'm not positive about this, but I seem to remember that the wrap around windshield started on Packards with the 1953 Carribeans. The Soviets used (or copied) the basic Packard body design, and Rolls-Royce used their engines. Packards were very well built. If they had merged with American Motors, it is likely Packard would still be with us. Jim Nance buying Studebaker is what killed Packard. The Packard hood ornament was missing on Carribeans. I always felt they should have placed it between the two hood scoops. That may have been too gawdy or rife with some type of technical reason it wouldn't work. The other Packards got the hood ornament.
I haven't failed. I've just found 10,000 ways that won't work.....Thomas Alva Edison
User avatar
19&41
Global Moderator
Posts: 1984
Joined: Thu Jul 08, 2021 10:11 pm
Location: Jonesboro, Georgia
Contact:

Re: Packard

Post: # 300Post 19&41 »

I've seen this little cut all day on youtube. It might be of interest.

https://www.youtube.com/watch?v=NRCuhJm-0gU
"Any sufficiently advanced technology is indistinguishable from magic."
-Arthur C. Clarke
"It is difficult to get a man to understand something when his salary depends upon his not understanding it."
-Upton Sinclair
User avatar
electra225
Site Admin
Posts: 9074
Joined: Thu Jul 08, 2021 7:48 pm
Location: San Tan Valley, AZ
Contact:

Re: Packard

Post: # 301Post electra225 »

I have never seen a '56 with the gray and turquoise paint scheme. I stand corrected. All the big ones from the '50's were there. Thanks for sharing that.
I haven't failed. I've just found 10,000 ways that won't work.....Thomas Alva Edison
User avatar
TC Chris
Anchor Member
Posts: 3778
Joined: Tue Jul 13, 2021 3:50 am
Location: Traverse City, MI
Contact:

Re: Packard

Post: # 325Post TC Chris »

19&41 wrote: ↑Wed Jul 21, 2021 3:14 am I've seen this little cut all day on youtube. It might be of interest.

https://www.youtube.com/watch?v=NRCuhJm-0gU
Nice video. And they all had Mae West bumpers.

Chris Campbell
Firedome
Anchor Member
Posts: 1615
Joined: Sat Jul 10, 2021 1:21 pm
Location: nowhere
Contact:

Re: Packard

Post: # 353Post Firedome »

Among the many (150+) vintage cars I've had (I was what's been called a "curbside dealer) I had a '56 Patrician in Moonstone blue/gray and a "56 Clipper in Tropical Turquoise. I was "firedome" on www.packardinfo as well. The '55 and '56s in some respects were way ahead of their time, but flawed masterpieces, using a recycled 1951 "high pockets" John Reinhart-designed body reworked by Dick Teague, later of AMC. Several major flaws surfaced due to rushed development in '55 as Packard was rapidly running out of of cash, in great part due to the decision by ex-GM exec "Engine Charlie" Wilson not to renew some very lucrative defense contracts, and lack of due diligence by Nance prior to the Studebaker merger, only to discover after the deed was done that Stude was sinking fast and a major money pit for a number of reasons. The fragile Twin UltraMatic (known among Packardistas as the UltraTraumatic), serious 320/352/374 oiling issues (solved in modern times by use of a modified Olds 455 pump), electrical issues in the TUM solenoid selectors, and balky contacts in the electric-motor pre-tensioned self-leveling 4 wheel Torsion Level suspension leading to cars sitting down on their haunches overnight. These in combination proved to be fatal albatrosses, sadly. My near mint original '56 Clipper was late production, with the available conventional spring suspension and 3 Spd column shift, thus avoiding many of the major issues. But on the deluxe models when all the gizmos worked the ride was truly a revalation. "Ask the Man Who Owns One" was truly apropos in this case. The doors clanged shut like bank vaults; the body was solid as rolling fortress. One can only imagine what Packard would be in 2021 if it had survived intact

Because Stalin was fond of Packard, they being imported for a while even after 1917, the Soviet ZIL and ZIS cars were rather crude hand-built copies, in no way using Packard dies as part of some apocryphal FDR order, as often incorrectly alleged. The WWII airplane engines were actual Rolls-Royce Merlin engines built under license, Packard engineers making their own improvements and their version actually superior to the RR built version. The triple V-12s used in PT boats were known for power and durability; Packard long and accurately had been known as "The Master Motor Builder". The '55/6 V8 would have been an industry-beater had its not been rushed. Happily they can be made so today. The smoothness and torque of the 1000 lb 9-main bearing 356 straight 8 in the Senior pre-war and post-war Super Clipper Packards has to be experienced to be believed. Packard truly was the American Rolls-Royce, and was in some respects superior.
User avatar
William
Global Moderator
Posts: 5513
Joined: Fri Jul 09, 2021 12:42 pm
Location: Hart, Michigan
Contact:

Re: Packard

Post: # 361Post William »

The more Packard is being talked about in this thread the more I'm learning about this amazing company. Keep it up please!

Bill
User avatar
electra225
Site Admin
Posts: 9074
Joined: Thu Jul 08, 2021 7:48 pm
Location: San Tan Valley, AZ
Contact:

Re: Packard

Post: # 366Post electra225 »

Although woefully out-of-date, I have wondered if Packard would have been better served to have continued the 359 cid Straight 8 into the 1955 models. It was a nine-bearing engine, at least the equal of the 356 it replaced. And it was lighter. This time would have given them the chance to wring the bugs out of the V-8.
I haven't failed. I've just found 10,000 ways that won't work.....Thomas Alva Edison
Firedome
Anchor Member
Posts: 1615
Joined: Sat Jul 10, 2021 1:21 pm
Location: nowhere
Contact:

Re: Packard

Post: # 374Post Firedome »

The 359 was basically a punched out version of the smaller and lighter 288/327 5 bearing st 8. Having ridden and driven both, the 356 is smoother imo, but not a huge difference there. It probably would have been a good engine for '55 but Packard was desparate for a V8 that should have been introduced no later '51 to keep up with the industry, as a luxury marque, and equal the Cad and Olds 98 ohv V8s from '49, and iirc the cowl was changed not allowing for the longer engine that year The Big side-valve 6, a great torquey engine also used in the taxis up to about '47, was never put into the '48 (bathtub) and '51 new models. I would have loved to see that engine in a '55/6, and actually thought of doing it with another '56 that I briefly owned but sold on.

BTW the Caribbean in the first pic I believe is a '55, the "Dagmar" location and more hooded headlights were different for '56. They really are magnificent cars, I too love the reversible cushions, but the '46/47 Custom Super Clipper with all wool interior and 356 was, imo, the Post-war zenith for Packard, the newest cars to be recognized as a Classic under the strict rules of the CCCoA, along with the '47 Cad 60 Special (had one of them too, best flathead V8 ever) Another personal favorite is the '56 Executive, a mid-level mashup of Senior front end and Clipper rear, the car that I'd thought of putting the Big Six and 3 Spd into.
Firedome
Anchor Member
Posts: 1615
Joined: Sat Jul 10, 2021 1:21 pm
Location: nowhere
Contact:

Re: Packard

Post: # 375Post Firedome »

Oh and Packard always pronounced it correctly as Cara-bee-an, not Ca-rib e-an.
User avatar
electra225
Site Admin
Posts: 9074
Joined: Thu Jul 08, 2021 7:48 pm
Location: San Tan Valley, AZ
Contact:

Re: Packard

Post: # 376Post electra225 »

They made two versions of the 327/359 Straight 8, didn't they? The 288 and the early 327 were five-bearing engines. The late 327 and all the 359's were nine-bearing engines. I did a '54 359 and it had nine bearings. The 288/327/359 were shorter and lighter than the 356, which was simply massive, no other words adequately describe it. How they kept the front end under a Packard with 1000 pounds of cast iron over the front axle is beyond me. The first version of Ultramatic had a cast iron case, so that added even more weight to the front end. My grandmother drove Packards. She never drove grandpa's Buicks. She had a 1950 Custom Eight with Ultramatic. They brought me home from the hospital when I was born in grandma's 1947 Packard. Grandpa told me he could tune that big 359 to idle at 250 rpm and stand a quarter on its edge on the head. The quarter would never move. Grandma's '50 Packard made grandpa's '50 Buick Roadmaster feel like you were driving a dump truck in comparison. Didn't the 359 come out in the '53 Carribeans?

I've heard the story of how Packard needed a V-8 earlier. I'm not sure I buy that theory. Packard was remowned for it's velvety smooth straight 8 engines. NOBODY built a straight 8 quite like them, even considering that they were all flatheads. "Packard people" valued Packard just for being Packard. You could have to pedal one, and people would still buy them. Packard blew it when they bought Studebaker. Packard could have continued to build their traditional high quality cars, powered by a straight 8, thru the end of the 1950's. This would give them time to sort the V-8 to Packard straight 8 refinement. Engine Charlie Wilson was a personal friend of my grandfather's.
I haven't failed. I've just found 10,000 ways that won't work.....Thomas Alva Edison
Firedome
Anchor Member
Posts: 1615
Joined: Sat Jul 10, 2021 1:21 pm
Location: nowhere
Contact:

Re: Packard

Post: # 379Post Firedome »

Yep the "small" 9 bearing 8s were based on the later 327s. Packard engines were always super durable and refined , so the V8 was a major disappointment. A guy named Jack (forget last name) in Las Vegas is THE expert on the V8s and the mods needed. They were also used in Stude Super Hawks until those started using the lighter blower 289. The 352 was a bit heavy in that car but great in a straight line! By the mid-50s a straight 8, as good as it was, was considered old-fashioned and inefficient, and they were't able to get it up much above about 8 to 1 compression to take full advantage of newer hi-octane gas. Even Chevy had an excellent V8 by then. Nance admitted as much publicly on a number of occasions and pushed for the '55 intro, already 3-4 years too late vs the other luxury marques, as Richard Langworth and Beverly Kimes have written in the past. IMO in 1952 they should have just bought-in the Chrysler NY/Imp 331/354 hemi until their own V8 engine was ready! But they could never have admitted that with their reputation. It could have been a great engine if properly developed, and the last production by Spring '56 did have most of the problems corrected... too late. June was the end, with only pretenders to come thereafter... the Packardbakers.
User avatar
electra225
Site Admin
Posts: 9074
Joined: Thu Jul 08, 2021 7:48 pm
Location: San Tan Valley, AZ
Contact:

Re: Packard

Post: # 380Post electra225 »

Was the 320 cubic inch version of the Packard V-8 ever used in a Packard? Maybe in the Clippers, which, by 1956 was a separate make from Packard. The 320 was used in Nash and Hudson cars, victims themselves of not having a modern V-8 of their own. The Nash 327 came out in 1957 and the Hudson was dead after 1957. The 320 in a Nash used Hydra-Matic transmissions. The hotrodders would buy Nashes and Hudsons with the 320 and use it for a hot rod engine, since they ran the "Hydro". Some Nashes and Hudsons got Ultramatic, but I don't know why some got Hydros and some got Ultramatic. The Ultramatic got a bad rap, in my humble opinion, un-deserved. My experience with Ultramatic has been good, outside of the push button controls. The Packard V-8 was an antique when it was introduced. IT had pretty bad breathing, not enough exhaust and could have benefited from better ignition and carburetion. It badly needed an AFB like Buick and Cadillac got. Even the baby Dodge Red Ram hemi would run off and hide from a Packard 374.
I haven't failed. I've just found 10,000 ways that won't work.....Thomas Alva Edison
Firedome
Anchor Member
Posts: 1615
Joined: Sat Jul 10, 2021 1:21 pm
Location: nowhere
Contact:

Re: Packard

Post: # 406Post Firedome »

Clipper was 320 in '55 and 352 in '56. Packard 352 in '55 and 374 in '56. It did have some issues, some like the carb choice being Packard's very conservative nature, but all could have been easily corrected. The 374s with twin 4 bbl certainly weren't under carbed! And those Dodge Red Rams were almost 1000 lbs lighter! The Packard block was designed to be bored out to 500, very heavy, but the engine's architecture was incredibly strong, probably more than any other '50s designed engine, which was to be expected given Packard's vast and renowned motor building experience. Very high horsepowers have since been produced in some latterly built Packard V8 engines in the last 20 years. They still have a small but very loyal following today.

Ultramatics were fine, it was the Twin Ultramatic that had significant problems, but they can be made OK today. A guy in Parkton MD named Ross who works on nothing but Packards is the expert. One of his other specialties is making a pickup out of '51 and later Packards, hence Packups. I've seen a couple of them at Packard shows, really cool. The HM in Nash and Hudson 320s was used to save some Packards with bad TUMs into the '60s, when re-sale value tanked due to all the problems when they became widely known.
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests