Labor Day
- electra225
- Site Admin
- Posts: 9074
- Joined: Thu Jul 08, 2021 7:48 pm
- Location: San Tan Valley, AZ
- Contact:
Labor Day
I hope you are all enjoying a safe and relaxing Labor Day weekend.
I haven't failed. I've just found 10,000 ways that won't work.....Thomas Alva Edison
Re: Labor Day
I was a get week end weather wise and we had a birthday party for my youngest granddaughter! I hope everyone had a nice time
- back-2-mono
- Senior Member
- Posts: 141
- Joined: Tue Jul 27, 2021 6:25 pm
- Location: Southern California
- Contact:
Re: Labor Day
Had a great weekend. The Weber and the hi-fi's both got a serious workout.
- 19&41
- Global Moderator
- Posts: 1984
- Joined: Thu Jul 08, 2021 10:11 pm
- Location: Jonesboro, Georgia
- Contact:
Re: Labor Day
Though it is a different day now, I was born on labor day 1956. I used to get a day off school and a birthday. I celebrated by taking my sister out to eat and sticking them for my senior discount. A little like when I came of drinking age. It too, was the first time I wasn't asked for ID.
"Any sufficiently advanced technology is indistinguishable from magic."
-Arthur C. Clarke
"It is difficult to get a man to understand something when his salary depends upon his not understanding it."
-Upton Sinclair
-Arthur C. Clarke
"It is difficult to get a man to understand something when his salary depends upon his not understanding it."
-Upton Sinclair
- William
- Global Moderator
- Posts: 5513
- Joined: Fri Jul 09, 2021 12:42 pm
- Location: Hart, Michigan
- Contact:
Re: Labor Day
Well Happy Belated Birthday Rex! I assume your birthday has passed, and as you had mentioned in another post you get to pick which supplement plan to get. Have you done that yet? I wish you all the best as you go into this part of your life. There will be days, just saying!
Bill
Bill
- TC Chris
- Anchor Member
- Posts: 3778
- Joined: Tue Jul 13, 2021 3:50 am
- Location: Traverse City, MI
- Contact:
Re: Labor Day
What with my Mom's decline and death, it has been an odd summer. I've got a 60-year-old sailboat in Bay City and always try to sail as often as possible. That makes for a better work-to-play ratio, not to mention the cost-to-sailing time ratio. But during Mom's decline I spent weekend time spelling my sister, her full-time (24/7) caregiver who protected her from Covid, and later spending time with my brothers who spent extended time there. The weather has not cooperated. When I had time for sailing, there has been either too much wind or not enough. I've been saying ""deleted" with it, I'm going out." Then I either sit there rocking motionless in the boat wakes or holding on for dear life with white knuckles. Last Saturday was a bit breezy but it was a day for working on Mom's house & stuff. Sunday, too windy; nobody else out either. Monday? Well, still a bit windy, but I'll reef the mainsail (tie off the bottom & hoist part way to reduce the sail's size). So I got the cover off the boat, the sail unfurled and reefed, the jib (forward sail) attached and numerous other small chores done. I started the outboard to power out of the marina. Started right up. But then I waited for the stream of coolnig water to pee out of the little hole. And waited. And waited. No luck. No water. No cooling. I lifted the outboard out (hey, I'm 74, and even an 8 hp outboard is heavy!). Removed the intake screen and checked for quagga mussels, the invaders. Nope,none. Lifted the outboard back in and tried again. No water. Lifted it out again and into the truck. Then folded the jib sail, furled the mainsail, covered the boat, and left.
Today, home again, I found a repair shop that (1) had the pump kit my outboard needed, and (2) was willing to do it right away. After he told me why they needed a pump kit and not just the rubber impeller, I was happy I had not tried to do it myself. Maybe some sailing next weekend?
Chris Campbell
Today, home again, I found a repair shop that (1) had the pump kit my outboard needed, and (2) was willing to do it right away. After he told me why they needed a pump kit and not just the rubber impeller, I was happy I had not tried to do it myself. Maybe some sailing next weekend?
Chris Campbell
- William
- Global Moderator
- Posts: 5513
- Joined: Fri Jul 09, 2021 12:42 pm
- Location: Hart, Michigan
- Contact:
Re: Labor Day
I'm thinking this is a summer you were not meant to sail, Chris. We all have times like this, I know I do, and with age they seem to come more often. I'm sorry this is one of those times for you.
Bill
Bill
Re: Labor Day
Some of the small Mercs had a PITA pump location up in the powerhead but many brands are fairly easy, the big motor lower units can be heavy though and shift-rod detach bolts in awkward places. We just had to replace the impeller, housing, O-rings &c on our trusty '98 Johnson 50 a few weeks ago, luckily son was able to handle the heavy l/u, too much for me now, and it's easier as a 2 man job to align the splined driveshaft up into the powerhead. We'd done many before, and no shop would touch it anyhow, all were booked up until Sept by July. Time for DIY delayed our getting the boat in the water until late July. We'd tested it, all being fine, 2 weeks earlier, then when we returned 2 weeks later we got it hitched up to go to the ramp, tested it again before launching: nada from the tell-tale, delaying launch until we could do the repair, by then the end of July.
All's fine with the new parts now, we had a few good trips last time we were up at camp. After many boats I"m loving the "old man boat" we have now, a pontoon that we call the Party Barge. Slow and comfortable scenic cruising is my speed now. Still have a 15' sailboat, kayaks, and a row boat for variety.
Also beware: running an outboard dry even for as little as 20-30 seconds can ruin an impeller, we saw that frequently during summers off from teaching, working as an outboard mechanic in Vermont. Always use muffs when testing. Impellers should be done every 4-5 yrs anyway.
All's fine with the new parts now, we had a few good trips last time we were up at camp. After many boats I"m loving the "old man boat" we have now, a pontoon that we call the Party Barge. Slow and comfortable scenic cruising is my speed now. Still have a 15' sailboat, kayaks, and a row boat for variety.
Also beware: running an outboard dry even for as little as 20-30 seconds can ruin an impeller, we saw that frequently during summers off from teaching, working as an outboard mechanic in Vermont. Always use muffs when testing. Impellers should be done every 4-5 yrs anyway.
- electra225
- Site Admin
- Posts: 9074
- Joined: Thu Jul 08, 2021 7:48 pm
- Location: San Tan Valley, AZ
- Contact:
Re: Labor Day
I have never owned a boat. I remember my grandpa and his brother tinkering with that old Chris Craft they had. It was powered originally by a Chrysler straight 8, later by a Packard nine-bearing 327. It had its own radiator. They didn't use permanent anti-freeze in it, so each fall, they would have to drain the cooling system and put in anti-freeze for the winter. Doing that and changing the oil was a pain in that big boat.
I haven't failed. I've just found 10,000 ways that won't work.....Thomas Alva Edison
- TC Chris
- Anchor Member
- Posts: 3778
- Joined: Tue Jul 13, 2021 3:50 am
- Location: Traverse City, MI
- Contact:
Re: Labor Day
Got my outboard back from the shop today. They had the impeller kit (new plastic housing, impeller, seals) on the shelf. They said I was lucky because there are Covid-related production and supply issues for some models. My life is so busy right now that I didn't mind paying somebody with knowledge to do it for me. Let's call it stimulating the local economy. What killed my impeller was the plugged intake last summer--quagga mussels made themselves a home and I didn't know until I saw steam blowing out the water stream home instead of water.
Outboards have long-vaned impellers that seem to last a lot longer in service than the short ones that many inboards use. On those, the thin, short vanes flex a lot more and can die from being bent all winter long. But yeah, don't run them without a supply of water. That burning rubber smell is not good. I've got a little 2 hp 1938 Johnson that uses a piston-style pump; it's still working after 83 years.
Chris Campbell
Outboards have long-vaned impellers that seem to last a lot longer in service than the short ones that many inboards use. On those, the thin, short vanes flex a lot more and can die from being bent all winter long. But yeah, don't run them without a supply of water. That burning rubber smell is not good. I've got a little 2 hp 1938 Johnson that uses a piston-style pump; it's still working after 83 years.
Chris Campbell
Who is online
Users browsing this forum: No registered users and 6 guests
