Page 1 of 1
RCA Ann Arbor VLT51W
Posted: Tue Oct 03, 2023 4:37 am
by steveX962
Good evening,
Looking for the bulb replacement size(s) for an RCA VLT51W stereo console. Can anyone provide me with this information. Thank you for your assistance in this matter.
Re: RCA Ann Arbor VLT51W
Posted: Tue Oct 03, 2023 9:34 pm
by hermitcrab
which bulb are you replacing?... if it is the dial light .... most are 6.3 volts , so I would say it is a #47,... stereo light? never replaced one on a RCA, but someone on the forum should know. I have a VLT62W the Villanova... its a decent player... welcome to the forum.
Re: RCA Ann Arbor VLT51W
Posted: Wed Oct 04, 2023 3:37 am
by Hi-Fi-Mogul
Steve,
Here is a partial parts list from Sams 1015-7 with 2 lamps noted.
The 1847 should be a standard #47
The CM12 appears to come in 2 different bases.
https://www.alldatasheet.com/datasheet- ... /CM12.html
Re: RCA Ann Arbor VLT51W
Posted: Wed Oct 04, 2023 4:26 am
by steveX962
hermitcrab wrote: ↑Tue Oct 03, 2023 9:34 pm
which bulb are you replacing?... if it is the dial light .... most are 6.3 volts , so I would say it is a #47,... stereo light? never replaced one on a RCA, but someone on the forum should know. I have a VLT62W the Villanova... its a decent player... welcome to the forum.
Thank you for this information!