Page 1 of 1
General question of why 4 ohms vs 8 ohms
Posted: Sun Aug 15, 2021 4:09 am
by Hydrolastic
Hello, I noticed the tube amps of the late fifties and early sixties the woofers are 4 ohms. When the SS units came in they used 8 ohms. Why did this happen? just wondering. Hydro
Re: General question of why 4 ohms vs 8 ohms
Posted: Sun Aug 15, 2021 11:41 am
by walyfd
The woofers on my '61 Fisher console are 16 ohm with 8 ohm mids and tweeters. Amp is the X202 (first version).
I often wondered why they ran the woofers at 16...
Re: General question of why 4 ohms vs 8 ohms
Posted: Sun Aug 15, 2021 1:10 pm
by William
I have always wondered the same thing? Does anyone out there have an answer?
Bill
Re: General question of why 4 ohms vs 8 ohms
Posted: Sun Aug 15, 2021 2:28 pm
by Hydrolastic
I am stuck in Magnavox. Just fascinated with the early stereo 58-60 models. To think months before these were made stereo was not available. Then a few years later in comes SS hardware. Out goes MPX in comes AFC. As a kid i remember equipment having AFC and never knew what it was or it seems to me it didn't work effectively in the city. But i never saw MPX that i remember.
But now that i am trying to fix these guys i now realize it the speakers that make the unit. The 1959 concert hall has the best sound of the 2 i have working it sounds amazing except over 1/2 volume the left 5 x 7 is clicking. but it seems the 4 ohm woofer era was after the field coil speakers to the solid state period just 10 years later.
Re: General question of why 4 ohms vs 8 ohms
Posted: Sun Aug 15, 2021 11:31 pm
by walyfd
My fisher from '61 is set up for simulcast with multiplex as a plug-in which I did add.
We have one talk station left that broadcasts on both AM and FM. I tuned in as a simulcast to balance the speakers and, surprisingly, it did sound like stereo.
1958 to '62 were very odd years in hifi but it also produced some of the very best units. Still all tube!
Re: General question of why 4 ohms vs 8 ohms
Posted: Mon Aug 16, 2021 2:08 am
by electra225
MPX (Multiplex) and AFC are two different systems. AFC, Automatic Frequency Control is a system somewhat like AVC used in AM radios. AFC helped prevent drifting in FM tuners. Multiplex is one of the sexiest terms ever applied to anything. I just always thought it was a neat term. Multiplex is nomenclature for FM stereo, used in its early days. Most tuners that were FM stereo-compatible used an MPX adapter for FM stereo. When the Astro-Sonic and New Vista solid state instruments were introduced, FM stereo decoding was integral with the tuner. GE had a full-stereo tube tuner in late 1960, the model T-1000. The term Multiplex started fading away when Multiplex adapters were no longer necessary for FM stereo reception. It is technically still with us today.
The only reason I could see they changed from 4 ohms to 8 or 16 ohms was speaker design. The more power speakers had to handle, the heavier the voice coil needed to be. As speaker technology advanced, they settled on 8 ohms as a standard value.
Re: General question of why 4 ohms vs 8 ohms
Posted: Mon Aug 16, 2021 4:35 pm
by Firedome
I've had many, perhaps a majority, of mid '50s to mid '60s tube amps that used 8 ohm speakers. Not sure about strictly Maggie speakers though.
Re: General question of why 4 ohms vs 8 ohms
Posted: Tue Aug 17, 2021 12:16 am
by electra225
My six Magnavoxes from 1960 to 1963 all have 8 ohm speakers.
Re: General question of why 4 ohms vs 8 ohms
Posted: Sun Aug 22, 2021 2:37 pm
by Hydrolastic
Hello, I need to get a volt/ohm meter running to verify but i have made a mistake in my earlier posting. In AK posts i was told repeatably the magnavox out put transformer impedance was 3.7 ohms. I just took that to mean the speakers were 4 ohms as i read you can go up in speaker impedance ohms but less is bad. It seems that if you have a 8 ohm speaker and a second 8 ohm speaker the total is 4 ohms and not 16. The 4 ohms would then match the transformer. I found another volt/ohm meter so i will do some testing today.